Crowd Barrier Graphics turn compatible crowd-control barriers into printed event display surfaces. The listed AirMesh jackets are intended for the specified 2300mm barrier format, with finishing variants that affect the jacket outline. These are printed graphics rather than barrier hardware, so match the selected jacket and its dimensions to the equipment already planned for the event. Choose a simple message that can be understood as people pass. Plan the position, fixing method and viewing direction before creating the artwork, and use the selected product's template to keep logos and lettering clear of edges and attachment points.
Match the jacket to the barrier, not just the event
The listed 2300-format barrier graphics measure 2190 × 890mm and use single-sided AirMesh jackets. Check the actual barrier equipment against that specification before ordering. A printed jacket is not the same as a loose banner tied across a rail, and a similar nominal barrier width does not confirm the fit.
Choose the corner treatment before laying out content
Two versions are listed: all rounded corners and top-only rounded corners. Select the intended finish, then keep logos and key text comfortably within the remaining graphic area. Across a run of barriers, repeat a short message at useful intervals rather than creating one continuous sentence interrupted by every gap.
Available specification and order choices
The current order options are 2300 Graphic (Single-Sided AirMesh Jacket, All Rounded Corners) — 2190mm × 890mm; 2300 Graphic (Single-Sided AirMesh Jacket, Top-Only Rounded Corners) — 2190mm × 890mm. Select the complete named configuration before preparing artwork or adding an item to the basket. The option label identifies what is being purchased; it does not replace the matching production template or a compatibility check for existing equipment.
What to know
Where it works
Crowd-barrier event branding
Queue-side promotional graphics
Event perimeter messages
Choose with confidence
Measure the intended position and check that the chosen size fits safely.
Plan suitable fixing or support for the location and follow the equipment instructions.
Keep important text away from edges, pockets, eyelets and other attachment points.
Not sure where to start? Add design help for £45 + VAT per design. Tell us what you need in your order brief; artwork approval is required before printing.
Your questions, answered.
Are the barriers included with the graphics?
No. This order supplies the printed jackets. The barriers and appropriate support arrangements must already be available or obtained separately.
Does 2300 mean the graphic is 2300mm wide?
The selected option labels the barrier format as 2300 and explicitly gives the graphic as 2190 × 890mm. Use the stated graphic dimensions and matching template.
Are both sides independently printed?
The active options specify single-sided AirMesh jackets. Do not assume a second separately readable graphic face from the fact that the material wraps around barrier equipment.
